Splice Cassette LGX Series

Category: Uncategorized

Splice Cassette LGX Series splice cassettes and enclosures support up to 72-Fibers per RU and are classified as medium density products.

One rack unit supports up to 3 LGX Series ARIA Splice Cassettes (ASCs) with support for 24-Fibers each.

The cassette features excellent fiber management, support for single or ribbon fiber, and maintains easily accessible ports.

The supporting enclosures are available in 1RU or 2RU formats and feature removable latching sliding trays.

ASC LGX Series Cassette

Specifications


Dimensions (Inches)	1.14 x 5.08 x 7.87 (HxWxD)
Fiber Capacity	12 SC or 24 LC
Compatibility	ARIA Splice Cassette LGX Series Enclosures
Material	ABS Plastic
Material Finish	Black with a Clear Lid
Weight (Empty) (lbs)	0.5

Cassette Features

LGX support provides a familiar interface that is compatible with a wide variety of existing enclosures.
The cassette has a spacious interior with numerous fiber management guides that provide separation between components and promote ease of use.
Patch & Splice, MPO Plug & Play, or Pre-Term configurations available
Tie-wrap, cable clamp, or compression fitting cable attachment options
Optional VFL compatible connectors with translucent shutters for enhanced dust protection

ASC LGX Series 1RU Enclosure

Specifications


Rack Units	1
Dimensions (Inches)	1.75 x 17.0 x 14.0 (HxWxD)
Fiber Capacity	36 (SC) or 72 (LC)
Mounting	19” or 23” Frames
Material	1.5mm Thick Steel and Aluminum
Material Finish	Dark/Light Gray Powder Coat
Weight (Empty) (lbs)	9.5

ASC LGX Series 2RU Enclosure

Specifications


Rack Units	2
Dimensions (Inches)	3.50 x 17.0 x 14.0 (HxWxD)
Fiber Capacity	72 (SC) or 144 (LC)
Mounting	19” or 23” Frames
Material	1.5mm Thick Steel and Aluminum
Material Finish	Dark/Light Gray Powder Coat
Weight (Empty) (lbs)	10.5

Enclosure Features

1RU or 2RU rackmount panel options.
Panels can be mounted at 4 different depths for 19” racks and 3 different depths for 23” racks.
Cable jackets and strength members can be secured at the back of the chassis or at the strain relief bracket.
The spring latching sliding tray improves connector and splicing compartment without removing the cassettes.

Latching, Sliding, and Removable Tray System

A spring latch at the front of the sliding tray when lifted permits the tray to slide forward or backward.

The sliding tray locks in the forward position and provides access to the splice cassettes and connectors for splicing, cleaning, and testing. A spring latch at the rear of the tray when lifted allows the sliding tray to be removed.