phone(925) 447-7500
FiberPatch™ Series Cassettes
Cassettes and Modules

Request for Quotation (RFQ)​

FiberPatch Series Wallmount Enclosure

Category:

FiberPatch™ is a compact fiber optic module that is supplied with adapters for connector patching on one end and a pre-terminated cable pigtail for splicing on the other end.

Fiber counts up to 48 and lengths as long as 1 km can be supplied with OFNR, OFNP, interlocking armor plenum, indoor/outdoor, OSP non-armored, OSP armored, flat drop, or alternative jacket cable.

This unique product can eliminate splicing at the building entrance, customer premise, or cell tower cabinet. It only requires splicing in a manhole/OSP splice case or building demarcation point.

Instead of installing conduit, pulling fiber through it, and then splicing pigtails, FiberPatch™ can be supplied as a system with cable, conduit, connectors, and an enclosure.

Features

  • ARIA FiberPatch™ is mountable in a variety of hardware and is offered with many pre-terminated cable options.

  • FiberPatch™ is offered in LGX, CCH, and 1RU formats. The LGX and CCH formats can be installed in any rackmount or wallmount enclosure that supports LGX or CCH type cassettes.

  • FiberPatch™ is compact and minimizes the use of crucial rack or wall space.

Rodent Proof Case

FiberPatch™ is provided on a reel when it is supplied with a cable length of at least 250 ft

FiberPatch™ with Non-Armored Alternative Jacket Cable and Pulling Eye Shown

FiberPatch™ is available with micro armored cable

LGX FiberPatch™

Specifications

Dimensions (Inches)
1.1 x 5.1 x 4.0 (HxWxD)
Fiber Capacity
12 SC or 24 LC
Material
1.5mm Thick Aluminum
Material Finish
Black Powdercoat
Compatibility
LGX Adapter Plate Openings
Notable Features
Compact Size

CCH FiberPatch™

Specifications

Dimensions (Inches)
1.4 x 6.1 x 3.8 (HxWxD)
Fiber Capacity
12 SC or 24 LC
Material
1.5mm Thick Aluminum
Material Finish
Black Powdercoat
Compatibility
CCH Adapter Plate Openings
Notable Features
Large cable O.D. support and great connector accessibility

1RU FiberPatch™

Specifications

Dimensions (Inches)
1.75 x 8.5 x 3.4 (HxWxD)
Fiber Capacity
24 SC or 48 LC
Material
1.5mm Thick Aluminum
Material Finish
Black Powdercoat
Compatibility
1RU Rackmount
Notable Features
Support for two large cables, great connector accessibility, and fiber management rings

Mounting Options

Wallmount brackets can be utilized to mount FiberPatch™ directly onto a wall
Open top Wallmount/Rackmount brackets can be utilized to mount multiple modules on a wall
Open top Wallmount/Rackmount brackets can be utilized to mount multiple modules in a rack
Open top Wallmount/Rackmount brackets can be utilized to mount multiple modules in a cell tower cabinet
The shroud accessory protects the patchcords from damage when the FiberPatch™ is mounted on a wall
The shroud with door accessory protects the patchcords and allows quick access to them after installation

Need MPO/MTP® Connectivity?

ARIA’s MPO Plug and Play Cassettes are similar to FiberPatch™ but provide an MPO adapter on the rear of the cassette instead of the pre-terminated stub.

This feature allows the module to interconnect MPO/MTP® backbones and patch cords.

This product is available in the following configurations:
12 Fiber SC to 12 Fiber MPO
12 Fiber LC to 12 Fiber MPO
24 Fiber LC to Dual 12 Fiber MPO

Applications: MDU Drops to Customer Premises

In this instance, the Pre-terminated FiberPatch™ is located at the customer premises and the spooled indoor/outdoor cable is routed outside to the manhole and spliced.

This method eliminates the costly splicing of fibers at both the building entrance and at the customer premises which results in savings of thousands of dollars in labor and materials as well as faster customer hook-up.
In this instance, the Pre-terminated FiberPatch™ is located at the customer premises and the spooled OFNR or OFNP cable is routed to the basement or building entry point and is spliced in an indoor rated splice-only enclosure (ARIA SPLWM shown above).

Another splice is performed at the manhole in an OSP Splice Case.

Applications: MDU Drops to Customer Premises

Cabinets or cell tower shelter racks can sometimes be loaded to capacity leaving no room for rack mount enclosures.

The ARIA FiberPatch™ provides the perfect solution to this problem.

Just mount the compact ARIA FiberPatch™ on the wall and route the cable to manholes or where splice cases are located for transition to backbone cables.

Accessories

19”-23” Extension Bracket for 1RU Wallmount/Rackmount Bracket
P/N: 19-23-REB-1RU-ALUM
19”-23” Extension Bracket for 2RU Wallmount/Rackmount Bracket
P/N: 19-23-REB-2RU-STL0
FiberPatch™ Wallmount Bracket
P/N: (Ordered with FiberPatch™ Part Number))
3 Module 1RU LGX Wallmount/Rackmount Bracket
P/N: 3XLGXW-RBRACKET-B-OT
2 Module 1RU CCH Wallmount/Rackmount Bracket
P/N: 2XCCHW-RBRACKET-B-OT
6 Module 2RU LGX Wallmount/Rackmount Bracket
P/N: 6XLGXW-RBRACKET-B-OT
4 Module 2RU CCH Wallmount/Rackmount Bracket
P/N: 4XCCHW-RBRACKET-B-OT
2 Module LGX Wallmount Bracket
P/N: 2XLGXWMBRACKET-B-OT
2 Module CCH Wallmount Bracket
P/N: 2XCCHWMBRACKET-B-OT
LGX FiberPatch™ Shroud with Door
P/N: AFP-LGX-SHROUD-WD
LGX FiberPatch™ Shroud
P/N: AFP-LGX-SHROUD
CCH FiberPatch™ Shroud
P/N: AFP-CCH-SHROUD
CCH FiberPatch™ Shroud with Door
P/N: AFP-CCH-SHROUD-WD

Part Number

All singlemode fiber optic cable assemblies provided by ARIA Technologies, Inc. are tested to: Telcordia GR-326 Issue 4 Specifications